E27 lamp holder threaded skirt plus shade rings in Brass

ES E27 

3 part bulb/lamp holder with shade ring

Brass plate Finish 

steel body

10mm thread fixing
Height 55mm
Width without shade rings 40mm
Shade rings 60mm wide

earthed

threaded skirt and shade ring

screw-in terminals

Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the colour between the photo and the actual item, we are not responsible for these issues.

The Edison Screw (ES) was designed by Thomas Edison and licensed in 1909 under the MAZDA trademark and displaced other socket types for general lighting in the early days of electrification in North America and Continential Europe.

As Edison screws were the only standard connector appliances other than bulbs were connected to mains electricity via the light socket!

For other interesting facts visit https://en.wikipedia.org/wiki/Edison_screw

FAQS - These are some of the frequent questions we are asked about our ranges of lamp holders

Q) Which bulb should I use for my lamp holder 
A)  http://light-fix.blogspot.co.uk/2016/07/which-bulb-for-which-lamp-holder.html

Q) I have purchased a 10mm threaded lamp holder but it will not fit the 10mm thread on my light fitting
A)  All our lamp holders are a metric thread so if  this does not fit you may have an Imperial thread.

Q) My lamp holder starts to come loose when I remove my light bulb,  how can I stop this from happening?
A) If your lamp holder has a locking nut (we will include this information in the item description) tighten the locking nut and this will resolve this issue.  If your lamp holder does not have a locking nut screw a nut on to the threaded rod and then screw your lamp holder down tight to the nut, when you next need to remove your light bulb the lamp holder will remain firmly in place

Q) I have locked my Edison Screw lamp holder  how do I unlock it? 
A)  We have produced a video showing how to  release your lamp holder https://www.youtube.com/watch?v=Nwf4xBuR4Zw

Q) Which terminal is the live terminal and which is the neutral?
A) As long as the earth cable is wired in correctly to the earthing point which will be indicated by an earth symbol it does not matter which terminal is used for the live and neutral

ES E27 

3 part bulb/lamp holder with shade ring

Brass plate Finish 

steel body

10mm thread fixing
Height 55mm
Width without shade rings 40mm
Shade rings 60mm wide

earthed

threaded skirt and shade ring

screw-in terminals

Note: Due to lighting effect, monitor's brightness etc, there could be some slight differences in the colour between the photo and the actual item, we are not responsible for these issues.

The Edison Screw (ES) was designed by Thomas Edison and licensed in 1909 under the MAZDA trademark and displaced other socket types for general lighting in the early days of electrification in North America and Continential Europe.

As Edison screws were the only standard connector appliances other than bulbs were connected to mains electricity via the light socket!

For other interesting facts visit https://en.wikipedia.org/wiki/Edison_screw

FAQS - These are some of the frequent questions we are asked about our ranges of lamp holders

Q) Which bulb should I use for my lamp holder 
A)  http://light-fix.blogspot.co.uk/2016/07/which-bulb-for-which-lamp-holder.html

Q) I have purchased a 10mm threaded lamp holder but it will not fit the 10mm thread on my light fitting
A)  All our lamp holders are a metric thread so if  this does not fit you may have an Imperial thread.

Q) My lamp holder starts to come loose when I remove my light bulb,  how can I stop this from happening?
A) If your lamp holder has a locking nut (we will include this information in the item description) tighten the locking nut and this will resolve this issue.  If your lamp holder does not have a locking nut screw a nut on to the threaded rod and then screw your lamp holder down tight to the nut, when you next need to remove your light bulb the lamp holder will remain firmly in place

Q) I have locked my Edison Screw lamp holder  how do I unlock it? 
A)  We have produced a video showing how to  release your lamp holder https://www.youtube.com/watch?v=Nwf4xBuR4Zw

Q) Which terminal is the live terminal and which is the neutral?
A) As long as the earth cable is wired in correctly to the earthing point which will be indicated by an earth symbol it does not matter which terminal is used for the live and neutral